Mio Modero MVP-5200i Informations techniques télécharger pdf (Page 59)

Setup Pages

MVP-5200i Modero Viewpoint Widescreen Touch Panel

Project Information Page (Cont.)

Sales Order: Displays the sales order information.

Purchase Order: Displays the purchase order information.

AMX IR 38K Assigned

Port:

Displays the AMX 38 kHz IR channel port used by the IR Emitter on the panel.

• This information is specified in TPD4 (Project Properties > IR Emitters &

Receivers tab).

• For example, if you set the AMX IR 38K Port to 7 and then put a button on the

panel with a channel code of 5 and a port of 7, it will trigger the IR code in slot 5

of the AMX IR 38K Port.

AMX IR 455K Assigned

Port:

Displays the AMX 455 kHz IR channel port used by the IR Emitter on the panel.

IR User Def1 Port: Displays the primary channel port used by the IR receiver on the panel.

IR User Def2 Port: Displays the secondary channel port used by the IR receiver on the panel

Build Number: Displays the build number information of the TPD4 software used to create the

project file.

Creation Date: Displays the project creation date.

Revision Date: Displays the last revision date for the project.

Last Save Date: Displays the last date the project was saved.

Blink Rate: Displays the feedback blink rate, in 10-second increments.

Job Comments: Displays any comments associated to the job (from the TPD4 project file).

Cradle Sensor Port: Displays the port used by the charging cradle sensor.

Cradle Sensor Channel: Displays the channel used to broadcast the charging cradle sensor status.

IR receivers and transmitters on G4 panels share the device address number of the

panel.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 183 184

Pas de commentaire

Mio Modero MVP-5200i Informations techniques Page 59